Firmware for our receivers

Always use the correct firmware for the model of your receiver.
Using 3rd party or incorrect firmware can make your receiver
un-useable! It will then need to go back to the factory for repair.
All firmware on this page is suitable for receivers sold in Australia
by Kristal Electronics and its re-sellers however we will not be
responsible for any damage that may occur to your receiver.
Use the firmware at your own risk!

ARION

• Satellite Irdeto embedded model AF3330
• Satellite Irdeto embedded model AF3030G
• Channel Editor for Free to Air model AF2000N
• Satellite Irdeto embedded model AF3030G, Fixes lip sync problem
• Box to Box Copy procedure for Free to Air model AF2000N

HOMECAST

• v2.66 for Satellite CI model eM200
• v2.66 for Satellite PVR model eM300
• v1.133F for Satellite PVR model eM320
• v1.29.2 for Terrestrial SD model eM1150
• v10253 for Terrestrial HD model HT5000, v3.00 hardware
• Loader software and instructions for all Homecast models

OPENTEL

• v6.07 for Satellite Irdeto model ODS4000IR
• v8.27.1 for Terrestrial SD model ODT3000F
• v2.27 for Terrestrial PVR model ODT4200PVR
• Loader software and instructions for ODT3000F and ODT4200PVR

WAVELENGTH

• Satellite FTA model DSR192
• Satellite FTA model DSR807
• Loader software and instructions for DSR192 and DSR807
• Channel Edit Software for DSR192 and DSR807
• Satellite FTA model DSR103
• Terrestrial SD model DTR279 with long Philips tuner
• Terrestrial SD model DTR279 with short Philips tuner
• Loader software and instructions for DSR103 and DTR279
• Channel Edit Software for DSR103 and DTR279
• WAVECOM Satellite FTA model WF731CO, loaded via USB on receiver